SmartTool Builder's Angle Sensor Module

The SmartTool Digital Angle Sensing Module is the most flexible, most accurate digital level in the industry. The Builder's Angle Sensor Module with it's custom inclinometer is the exact same module that is found permanently mounted in the 24 and 48 inch SmartTool levels. It can be used stand alone or in many accessories including M-D's Carpentry and Construction I-Beam levels ranging in length from 24 to 96 inches, some with magnetic strips. The Builder's Angle Finder Module's small size makes it perfect for use as a quick, pocket sized level for almost instant measurement of all angles, not just level and plumb.
Controls include:
- ON/OFF - automatic shut-off if left idle for 6 minutes
- HOLD - freeze or unfreeze display readings
- LISTEN & LEVEL AUDIO - beeper will sound at level and plumb
- CALIBRATE - simple two-step calibration procedure
(recommended once per day) - Deg.,%,IN/FT - select display units
- UP/DOWN ARROWS - show direction of tilt to reach level or plumb
- LOW BATTERY - low 9V battery indicator
Dimensions are 6" x 1 1/2" x 2". Weight 7 1/2 oz. Housed in environmentally sealed polycarbonate housing. 9 volt battery provides up to 120 hours of continuous use.Smart Tool enables you to find level and plumb in two ways. For quick reference, use the sensitive acrylic bubbles. For high precision, use the digital display with amazing accuracy within 1/10 of a degree. If you're not dealing with plumb or level, Smart Tool quickly identifies any angle in 3 different modes: degrees, % slope and pitch.