AC Electric pulling/lifting winch

This electric powered pulling/lifting winch is ideal for inside applications such as pulling wire thru conduits or lifting equipment. Its rope grabbing system will hold a load in position allowing the operator to work safely. The electric motor is activated simply by pulling on the rope. As soon as the operator stops pulling, the motor stops and the drum stops turning, preventing rope damage.
Specifications:

Weight  -27 kg (60 lb)
Dimensions
 -Length 55,6 cm (21-7/8'')
 -Width 36,6 cm (14-3/8'')
 -Height 36,6 cm (14-3/8'')
Certification
 -CE certified
Engine
 -AC Electric Baldor TEFC 115/230 VAC - 1 ph - 3/4 HP
Gear box and gears
 -Aluminum alloy gear box. Heat treated 3 stage spur gears. Shafts mounted on ball bearings. Oil bath lubrication.
Gear ratio
110:1
Brake
 -Brake Anti-reversing needle bearing
Clutch
 -direct drive
Rope grabbing system
 -included (can be disabled)
Capacity
 -Max. pulling force 820 kg (1800 lb)
 -Rated lifting cap 250 kg (550 lb)
Capstan drums
 -Installed 85 mm (3-3/8'') (w/safety lips)
 -Optional 57 mm (2-1/4'') (w/safety lips)
Turns at idle  - No idle on electric motors
Speed
 -with 57 mm drum 7 m/min (23'/min)
 -with 85 mm drum 10,5 m/min (35'/min)
Work cycle
 -25% (15 min./hour to prevent motor overheating) Rope
 -Pulling Double braided polyester. Unlimited length.
 -Minimum diameter 10 mm (3/8'')
 -Maximum diameter 16 mm (5/8'')
 -Lifting Double braided polyester. Unlimited length. Splice and thimble mandatory for lifting applications
 -Minimum diameter 12 mm (1/2'')
 -Maximum diameter 13 mm (1/2'')
Warranty on Winch components
 -Private use 2 years
 -Commercial use 1 year
Warranty on Engine - Baldor International Warranty
Anchors
 -Included Polyester sling 60 mm x 2 m (2-3/8'' x 6')
 -Optional Different types according to the task