Categories
Sale Item
Home » SURVPRO Surveying Accessories» ZIP LEVEL
# Zoom
#

ZIPLEVEL Pro-2000 High Precision Altimeter

SKU: 69-ZIP PRO
Price:
$1450.00

Qty: - +
   - OR -   

The ZIP LEVEL Replaces Rotary Lasers as the World's Fastest, Easiest, most Powerful, Precise and Only Pressurized Bubble Free Level.


Unlike a rotary laser, ZIPLEVEL lets you truly work alone to quickly and easily level and read elevations directly in unmistakably clear digits. No more rods, tripods, sensors, line-of-sight, error with distance, factory calibration and tedious computations. Now you can measure over any distance or elevation on earth, from paper thickness to the height of a mountain without error-inducing tabulation and math.

Features:

  • Displays elevations directly to: 0.1”, 1/8”, 0.01’, or 2mm; 0.01”, 0.001’, or 0.2mm in high precision (HP) Range
  • "Sees" around or over visual obstructions
  • Setup vertical range is equivalent of a 40' (12m) rod and a 20' (6m) tripod
  • Measure over any elevation or distance on earth without calculations
  • Built job-site rugged and never needs factory calibration
  • Auto-Off: Shuts unit off after 4 min. without movement or key presses to preserve battery.
  • Hold: Freezes the display if not in view – also used with other functions
  • Zero: Sets display to read zero at a reference – the same as setting the target on a rod.
  • Scale: For readings in fractional or decimal inches, feet or meters
  • RES: For faster, less precise rough readings
  • Mark: Lets you sound leveling or limit tones to supplement the display
  • Record: Gives Average, Minimum or Maximum of any number of readings.
  • CAL: Calibrates accuracy of vertical readings – like calibrating a rod.
  • Temperature: Displays ambient temperature – useful in concrete work or with adhesives.
  • High Precision: Allows paper-thin measurements to 0.005” (0.1mm) in HP rang
  • Carry: Allows unlimited ranges without tabulation or calculation
  • Elevation: For setting readings in sea level elevation at a known survey monument.
  • Record Data: Stores up to 137 readings for later recall
  • Inspect/Dump: View stored data or dump to PC for tables, profiles, 3D or Topo map
  • Monitor: Logs data on a PC to monitor levels of tanks, lakes or streams.

Specifications:

  • Setup/Pack-Up Time: Typically less than 30 seconds to unpack, zero and read.
  • Ranges: 40’ vertical (4’ in HP) by 200’ horizontal circle (150’ for PRO-2000B); Unlimited ranges in CARRY function.
  • Internal Precision: 0.05”; 0.005” in HP.
  • Typical Isothermal Accuracy: Greater of 0.1” (0.01” HP) or 0.15% of measured elevation.
  • Temperature Range: -22°F to +158°F (-30°C to +70°C) operating; -40°F to +158°F (-40°C to +70°C) storage.
  • Drop Resistance: Measurement Module 5’ (1.5m) onto concrete; Base Unit 3’ (1m) onto concrete
  • Water Resistance: Can be lightly rinsed with a hose but cannot be immersed.
  • 9V Battery Life: 1 year of typical daily use.
  • Memory Life: Saves latest data and settings indefinitely even without a battery.
  • PC Serial Port: IR output for optional PC Serial Interface cable
  • Unipod Length: 15” (38.1cm) to a calibrated 48” (121.9cm).
  • Weight: Measurement Module 1 lb (0.45kg); Total weight 12 lbs. (5.50 kg), 8 lbs. (3.65kg) PRO-2000B.
  • Size: Measurement Module with boot 3.75”H x 4.75”W x 1.75”D (9.5cm H x 12.1cm W x 4.5cm D), Base Unit 16.0”H x 10.5”W x 7.5”D (40.6cm H x 26.7cm W x 19.1 cm D).
  • Warranty: One year parts & labor for mfg defects; 2 year prorated for hydro-pneumatic parts & labor.

Included:

  • Ziplevel Pro 2000 High Precision Altimeter
  • 100-foot cord
  • Rubber protective boot
  • Unipod
  • Stakes (2)
  • User manual
  • 1-year manufacturer's warranty

Why ZIPLEVEL® is Replacing Rotary Lasers . . .

Much like a water level, the builder’s level and rotary laser simply create a flat reference plane that you hope is reasonably level if the instrument hasn’t been jarred out of factory calibration enroute to the job site. On the job where profits are measured in time, conventional levels make you work long and hard. Both the set up and pack up require five to ten minutes each due to tedious coupling, calibration and decoupling of delicate components while jockeying with one or more protective cases. This overhead often causes workers to avoid checking jobs leading to costly errors. To further complicate your work, the real world has hills, valleys, grading, excavations and visual obstructions. If you want to measure a change in elevation you must read and subtract numbers from a rod where larger readings mean lower elevations and smaller readings mean higher elevations. Visual obstructions require multiple setups, differential leveling and of course more error inducing, counter-intuitive rod readings and math. In all but rare exceptions, your work is done at a different elevation than the instrument height so you must have a rod man locate a laser beam while you, for example, adjust concrete forms far below. This is not the advertised one man operation . . . and don’t forget, you must frequently charge or change both laser and sensor batteries.

The revolutionary ZIPLEVEL® PRO-2000 is a high precision altimeter that not only levels but reads elevations in unmistakably clear digits while solving all of the foregoing problems. Savings start with the two second set up and five second pack up time so there is no excuse to avoid checking a critical measurement. A press of the Measurement Module Zero key anywhere within the 40’ vertical set up range sets an infinite size level benchmark plane. It’s like setting a laser instrument height at the elevation where you might wish to level. ZIPLEVEL adapts to you rather than making you adapt to a laser with a rod and sensor. You can instantly level or adjust forms by yourself for true one man operation. Elevations are displayed directly in your favorite scale with positive digits above and negative below your benchmark with 0.050 inches precision without math or line-of-sight. Because ZIPLEVEL technology is immune from tilted level plane problems, there is no need for factory calibration and no error with distance. In fact, ZIPLEVEL’s powerful Carry Function lets you measure over any distance or elevation on earth without tabulation or math. Our new dual range ZIPLEVEL can now detect the thickness of a sheet of paper with 0.005” (0.1 mm) internal precision for measurements never before possible. As a bonus, the rugged ZIPLEVEL runs for up to a year of typical daily use on a single 9V battery over temperatures of -22F(-30C) to 158F ( 70C) with storage to -40F (-40C), has 16 powerful built-in functions and a PC Serial Port.

With tens of thousands sold worldwide since 1996, a one year warranty (two year pro-rata on hydro-pneumatics) and a 30 day money back guarantee, why not join the measurement revolution? Now you can enter real world of the 21st Century with the affordable ZIPLEVEL® PRO-2000 and save time, reduce errors and cut costs.

Currently there are no reviews for this product. Share your opinion with others, be the first to write a review.

Add Your Review


Your Name:
Email Address:
Review:
Note: HTML is not translated! Your email address will not be shared with anyone.
Your Rating: 1  2  3  4  5
Verification:
Submit Your Review
Your Name:
Your Email:
Friends Name:
Friends Email:
Subject:
Message:
Verification:
Send Message